BELT

The Sewing Machine tube

The Sewing machine Tube is in line with the machinery of formal means to transform fabric bias.

The process consists of 3 operations:

• The first is to place the fabric from the cylinder or the flat panel.
• The second allows to fold the fabric in half and edge to edge. At the third operation, the edges are perfectly aligned, ironed and sewn together to form a tube.

The highlights are:

• Controlling the tension of the tissue at this stage is the point for a high level of accuracy during the ribbon cutting.
• special device for linking two units of fabrics fabrics transform the continuous and uninterrupted series.
• precision sewing and ironing his liaison invisible condition and thus the continuity of the fabric after being bias.

production capacity is 16 ml / min.

Maximum width of 2.40 meters.

charger rolls of tissue for the treatment of 5-cylinder series

charger flat panel allows the inclusion of a load of 4000 ml at once.

accessories of this machine are:

• charger cylinder and pallet with upgrades
• cabinet power
• supports PVC tubes for winding tissue shaped
• carts handling cylinders
• containers for empty cardboard tubes

Machine Implementation Bias

of woven fabric sewn in a tube, the machine turns Bias Setting fabric warp and weft sewn into a fabric tube with a fabric oblique to 45 °.

The manufacturing process is as follows:

• semi finished product consists of a fabric tube and stitched wound on a PVC support is mounted on a transverse axis. The tube of fabric is positioned on 2 forks that hold the tube open.
• On top of this open tube, a blade positioned at 45 degrees, cut the fabric oblique.
• Then, the fabric cut and turned into means is wound on a cardboard.

line setting means operates synchronously by rotating the semi finished by 2 axes, one to place the fabric and the other by turning on the tube itself to cutting as a épluche orange. As the progress of semi finished bias, the fabric is cut obliquely rewound into a cylinder of tissue at an angle.

strong point is that, whatever the initial flexibility of the fabric, the line-up means to control the degree of formal and oblique tension cylinder for a subsequent cut to make more precise ribbons.

capacity of this machine offers a performance of 80 ml / min

Accessories are:

• cabinet power
• A safety device for cutting carpet circuit
• support coil kraft protection

The Winding machine line

of a cylinder of tissue crude machine Wire Winding Law allows for a roll of fabric structure with a control voltage winding uniform throughout the length of the roll.

The fabric is place and visited throughout the length to be re-rolled with a control and adjustment of the tension of the fabric on the cylinder.

strong point is that the winding can prepare rolls of fabric to be cut to provide the density and diameter appropriate to specify a cut depending on the nature of the fabric and size of cut to produce.

capacity of this machine offers a performance of 70 Ml / min.

Accessories are:

• cabinet power
• Support for coil PVC protection film

Increase belt

production lines increases belt can be assembled in a single step all components used in the manufacture of increased belt

The manufacturing process is as follows:

• coils corresponding to the elements to be joined are positioned in appropriate reels.
• Each band through a brass guide to be positioned against each other before fixation.
• positioned components are sewn together and / or fixed by fusing sequentially to get at the end of the line finished product desired.
• The finished product is wound into rolls after fixation.

The Highlights are:

• The design of assembly line increases belts can produce in a single operation all the fixtures and clothing operations necessary.
• The presence of numerous sensors to identify the manufacturing process and to alert operators to distance in case of intervention necessary.
• This device allows an operator to easily drive up to 8 active lines in masked time.

capacity of these machines offer a performance of 15 Ml / min

Accessories are:

• cabinet power
• trucks flatbread to wrap
• preparation tables manufacturing

La Machine Cup

of a cylinder of tissue in line or at an angle, the cutting machine to debit cakes tape to make strips the desired width.

operation is to position the cylinder of fabric cut on an axis on one side open. A jaw drive is blocked at the other end of the cylinder for the lead in a circular motion on itself.

operator makes a clean cut first, then introduces the numerical number of wafers to be cut and the desired width.

blade circular, rotating in the opposite direction of the cylinder, slice cakes in the number and width controlled automatically by the machine.

After each haul cutting, the blade retracts automatically and is sharpened to a perfect fit.

cutting stops automatically at the end of the series and the operator only has to withdraw from the round of cuts the remainder of the cylinder and not charged patties produced tapes.

strengths are accuracy and laser guidance to produce wafers of very small width (5 mm) and with a mastery of high level of consistency of the scale from the beginning to the end of the roll .

This quality and precision that can facilitate and ensure a continuity of production during the passages in the guides to the confection.

capacity of the machine offers a performance of 400 ml / min per slide.

Accessories are:

• cabinet power
• trucks cakes cut

Special machines

knitting machine bar codes involves a computer system for creation and management codes and machine knit white and black son to make unique designs for each bar code.

labels bar code knit have a long lifetime for the traceability of clothing and washing machine capable of numerous and intense.

machine to make the caterpillars had the advantage of using metal son wear guides.